welcome to contact
TEL:+86-576-82750318 / +86-15168628826China agricultural plastic machinery manufacturer
When the seed planter is placed indoors, the parking […]
When the seed planter is placed indoors, the parking place of the machine should be flat and firm, and the parking place should consider convenient dust removal.
2. Before the operation, check whether the connecting screws of all part are tightened, whether the driving parts rotate flexibly, whether there is no abnormal sound, and whether the tension in the driving tape is appropriate.
3. When changing varieties in the process of operation, be sure to clean up the remaining seeds in the machine, and keep the machine running for 5 ~ 10 minutes. At the same time, switch the front and rear air volume adjusting handles several times to eliminate the remaining seeds and impurities deposited in the front, middle and rear chambers.
4. If it is restricted by conditions and must be operated outdoors, the machine should be parked in a sheltered place and placed downwind to reduce the influence of wind force on the planting effect. Wind barriers should be installed when the wind speed is greater than level 3.
5. Before each operation, the oil should be added to the lubricating points. After the operation, cleaning and inspection should be carried out, and faults should be eliminated in time.
The seed planter has wide adaptability and can work on wheat, rice, corn, sorghum, beans, rape, pasture, and green manure by changing the sieve and adjusting the air volume. The use and maintenance requirements of this machine are high, and any negligence will affect the quality of seed selection.