news

We Have To Check Before And After Corn Thresher Work

Update:21-07-2021
Summary:

  Large corn thresher manufacturers tell you: no matter […]

  Large corn thresher manufacturers tell you: no matter what large machinery we use in the later period, the pre-use inspection must be done. It can be said that this directly affects our safety and operation speed. Today, our Luqiao Hongxiang Agricultural Machinery Company. The company will give you an analysis of the inspection items that the corn thresher needs to carry out before and after the operation. Let’s take a look at it together?

  corn thresher check before work:

  1. When inspecting the large corn thresher, we must remove the remaining grains and sundries after the previous operation, and conduct a comprehensive inspection of the machine. Lubricating oil should be added to the rotating parts of the bearings and other parts every shift.

  2. The components of the corn thresher should be in good condition, and any faults should be eliminated in time. Check the tightening of the bolts at all parts, and tighten them if they are loose.

  corn thresher post-work inspections we all need to pay attention to:

  1. After maintenance, the inside and outside of the machine should be cleaned and placed in a dry and ventilated room. The machine should not be placed directly on the ground to avoid moisture. If the paint comes off, it should be repaired, and the unpainted parts should be painted with anti-rust oil.

  2. Check the bolt tightening of each part after each operation, and maintain the machine. A comprehensive inspection should be carried out after the operation of each season. If there are damaged or severely worn parts, they should be repaired or replaced in time to ensure the next threshing season.

0
Views: 52